La serie TGM2LC es un producto desarrollado para satisfacer las necesidades de las redes eléctricas urbanas y rurales, así como de otras redes de distribución que requieren funciones de reconexión automática por corriente residual.
Esta serie de interruptores automáticos es adecuada para redes de baja tensión de tres fases y cuatro hilos con neutro sólidamente conectado a tierra, con una frecuencia de CA de 50 Hz, un voltaje nominal de 400 V y un voltaje nominal de aislamiento de 800 V. La corriente nominal de la estructura (calibre de bastidor) del interruptor automático se divide en 125 A, 250 A, 400 A, 630 A y 800 A. Su corriente de ajuste va desde 65 A hasta 800 A, mientras que la corriente nominal residual de operación se sitúa entre 50 mA y 1,000 mA.
El interruptor automático cumple con las siguientes normas:
IEC60947-2
IEC60947-4-1
1. Ambient air temperature: -5ºC-+40ºC;
2. The attitude of the installation site does not exceed 2,000m;
3. The air relative humidity at the installation site shall not exceed 50% at a maximum temperature of +40ºC,and a higher relative humidity is allowed at the lower temperature. For example, the relative humidity can reach 90% at +20ºC. Protection measures should be taken to deal with occasional condensation due to temperature changes;
4. Pollution class: 3;
5. The installation category: III;
6. The circuit breakers should be installed in a place without explosive hazard, conductive dust and corrosion against metal and damage to insulation;
7. The circuit breaker shall be installed in the place without invasion of rain and snow;
8. The external magnetic field of the installation site shall not exceed 5 times of the geomagnetic field in any direction.
| Frame rated current Inm(A) | 125 | 250 | 400 | 630 | 630 large volume | 800 |
| Setting current Ir1 (A) | 65/80/100/ 125, adjustable | 100/125/140/ 160/180/200/ 225/250, adjustable | 160/200/225 /250/315/350 /400, adjustable | 400/440/480 /500/530/560 /600/630, adjustable | 400/440/480 /500/530/560 /600/630, adjustable | 400/500/630 /700/800, adjustable |
| Pole number | Three-phase four-wire (3P+N) | |||||
| Rated working voltage Ue | AC400V/50Hz | |||||
| Rated insulation voltage Ui | 1000V | 800V | ||||
| Rated impulse withstand voltage Uimp | 8kV | |||||
| Rated short-time withstand current Icw | 1.5kA/1s | 3kA/1s | 5kA/1s | 8kA/1s | 10kA/1s | 10kA/1s |
| Rated remaining action current gear I △n(mA) | 50, 75, 100, 150, 200, 300, 500, 800, 1000 (adjustable; can be turned off), default 500 | 100, 150, 200, 300, 500, 800, 1000 + OFF (adjustable, can be turned off), default 500 | ||||
Aquí puede enviarnos una consulta sobre preguntas generales sobre TENGEN
Nuestro sitio web utiliza cookies para ofrecerle una mejor experiencia en vivo. Al seguir navegando por el sitio web, está de acuerdo en que usemos cookies de acuerdo con la política de cookies.
Acepto